Preparation work before installationBefore installing the slurry pump, a series of preparatory work needs to be carried out, including cleaning, foundation prep

Open the packing box: check if the packing has hardened, shattered, or has uneven axial wear.Select specialized fillers such as carbon fiber impregnated with PT

maintenance methodsRemove residues inside the pump casing: Ensure that the interior of the pump casing is clean to avoid residues affecting the operation of the

1. Check and adjust the alignment situationMisalignment between the pump shaft and motor shaft is a common cause of bracket vibration. Use a dial gauge or laser

Common causes of abnormal pressure faultsThe sealing performance of the pump decreasesReason: The damaged sealing ring of the pump causes fluid leakage, and the

Troubleshooting steps1. Check the suction pipe and bottom valveFirstly, it is necessary to check whether there is any air leakage in the suction pipe and bottom

Remove any residue inside the pump casing to ensure its cleanliness.Use oxygen acetylene to remove impurities from the pump, while heating the pump itself and t

1. Confirm the cause of the leakBefore starting the repair, it is necessary to first confirm the specific cause of the leak. For example, it may be due to abnor

fault diagnosisThe diagnosis of slurry pump bearing faults mainly includes the following aspects:Abnormal sound: If the slurry pump makes abnormal noise during

1. Immediately stop the operation of the pump and check itIf the impeller of the slurry pump is found to be reversed, the first thing to do is to immediately st