Maintenance and upkeep guide for slurry pump

---

• TIME : 2024-07-18

The guidelines for maintaining and servicing slurry pumps typically include the following key steps:

1.Daily check:

Check the operating status and vibration of the pump to ensure there are no abnormalities.

Check the leakage of seals and bearings.

2. Lubrication:

Regularly inspect and replace lubricating oil or grease.

Ensure that the bearings and seals of the pump are adequately lubricated to extend their service life.

3.Cleaning:

Regularly clean the dust and debris inside and around the pump, especially the inlet and outlet parts.

4.Sealing inspection

Regularly inspect the sealing components of the pump, such as O-rings or mechanical seals, to ensure good sealing and prevent leakage.

5. Regular maintenance:

Develop a regular maintenance plan based on usage frequency and working conditions, including cleaning filters, inspecting motors and electrical components, etc.

6. Special Precautions:

For special slurry pumps, additional maintenance steps or precautions may be required, such as taking anti-corrosion measures when handling corrosive liquids.

The above is a general maintenance and upkeep guide for slurry pumps. Specific operations should be carried out according to the specific model and the maintenance manual provided by the manufacturer.

　　This article originates from https://www.fuyangpumps.com/news/124.html. Please indicate the source when reprinting.

(Editor in charge: Slurry Pump https://www.fuyangpumps.com/)

• Previous: Application and challenges of slurry pumps in the mining industry
• Next: Analysis and solution of slurry pump wear problem